You probably have easy access, it is much simpler to tear out all of the old supply, drain and vent lines and begin with a clear slate (Photos 5 and 6). Mount the supply and discharge traces to the toilet with the seals supplied and slip the bathroom bowl into position over the mounting studs. Because remodels and additions are so assorted in scope, it may be onerous to nail down a generalization of what they should cost Nonetheless, a few of the most common additions and remodels are comparatively customary across the board.
Substituting a bathe for the bathtub, including a big mirror, and using a wall-hung sink and bathroom all contribute to the spacious feeling. Toenail 2×6 blocks in the middle of the bathe 36 in. above the ground for the bathe valve and 6 ft. 6 in. above the floor for the showerhead. Our lavatory is 6 ft. huge, so we added a flooring-to-ceiling 2×6 wall on the showerhead end and a shorter 2×6 wall at the opposite end.
Connect the sink to the entice and drain line, and the availability strains to the roughed-in copper strains with compression valve shutoffs. Converting existing floor area – Changing present flooring house right into a household room prices about $7,500 to $25,000 or more, relying on options and supplies. Nonetheless, excessive demand and tight provide are pushing up housing costs and including to issues about affordability.
However run the plastic drain traces and vents earlier than starting any provide work. Drain any water within the supply traces, reduce the cold and hot traces feeding the bathroom, and solder in two ball-valve water shutoffs. In case your rest room is built on concrete with the principle stack instantly behind the bathroom as ours was, stick to a standard, ground-mounted toilet so you will not have to chop out the floor and rework the plumbing underneath the concrete.
Including a deck – Adding a simple 10×12 deck made with customary supplies can value from $1,000 to $2,000. Adding new ground space – Including floor space for a family room can cost from $30,000 to $one hundred,000, depending on options, materials, and what sort of electrical might be installed. Attach the bathe supply line and the cold and warm provide lines to the valve.